Grout & Tile Protector

LTP Grout & Tile Protector can be used on any sort of Ceramic, Porcelain or Natural Stone.

Areas to be treated must be cleaned. Older contaminated and dirty grouting should be cleaned with LTP Grimex and then rinsed thoroughly. Newly grouted surfaces should be left to cure for 20-30 minutes and should be clean and free from dust before application. Always test the product on an inconspicuous area for suitability before general application. Shake can well.
Spray 15-20 cm from the surface and spray in a sweeping motion. Touch dry within 5 minutes. A 2-3 hour curing time is recommended upon completion before allowing traffic. For wet areas including shower enclosures and wet rooms allow the sealer to cure for a minimum of 24 hours before use. Test area
after application with a little water, if the water is absorbed, a second or even third coat may be required to obtain maximum performance. Use only in open or well ventilated areas. Open windows and if possible use fans to circulate air. It is recommended that a suitable respiratory mask be worn at all times. Overspray on highly polished porcelain or stone and highly glazed surfaces may in some cases leave a slight residue, in which case wipe up any excess within 5 minutes. Stubborn residues left on the surface can be removed with the application of more LTP Grout & Tile Protector which should
then be buffed off immediately. Do not spray on to acrylic or stained surfaces such as cabinets and stained timber skirting boards. Mask and protect these
surfaces before application. Shake can well before use. Use only as directed.

For a video tutorial, click here.

No, if you follow the provided instructions above or on the bottle correctly.

Grout & Tile Protector should be used as soon as the area you’re wanting to protect is laid and thoroughly cleaned.