Description
Frequently asked questions
What Materials can Mattstone H20 be used on?
LTP Mattstone H20 is suitable for all types of natural and artificial stone, unglazed porcelain, sandstone, slate, marble, terracotta, quarry, brick & concrete, as an impregnating sealant.
How do i use Mattstone H20?
Preparation: Ensure surface to be treated is completely clean, dry and free from dirt, grime, cement and grout. If necessary, first wash surfaces with a dilute solution of LTP Grimex 1:10 Rinse well to remove residues and leave to dry (24hrs). Rough cut, tumbled, textured or riven surfaces Shake bottle
before use. Apply generously and evenly using a paint brush or sponge. On highly absorbent surfaces apply further coats at hourly intervals until the surface is fully saturated. After 1 hour remove any excess sealer with an absorbent towel. Do not allow residues to dry on the surface. Honed, smooth and polished surfaces Shake bottle before use. Apply generously and evenly using a lint free cloth, lambs wool applicator, paint brush or sponge. Leave surfaces to dry. Remove any residual sealer after 1 hour by rubbing with a dry
microfibre cloth. On vertical surfaces apply from the bottom up.
For a video tutorial, click here.
Does Mattstone H20 come in different sized bottles?
Can Mattstone H20 deteriorate my material?
No, if you follow the instructions provided above & on the bottle correctly, then Mattstone H20 will not deteriorate any material.
When should i use Mattstone H20?
Mattstone H20 should be used on any porous Natural Stone product as an impregnating sealer to stop any liquid from seeping into the face of the stone and potentially staining the stone itself. A good way to test if your Natural Stone product needs sealing/re-sealing, is to flick a small amount of water on to the stone, if it sits on top of the stone it is sealed. If it seeps into the stone, then it will require re-sealing. Mattstone H20 offers a more economical water based seal rather than LTP Mattstone, being an oil based sealant.
