• Unit Size: 1L Bottle
• Colour: Green / Blue
• Application Temperature: 5°C to 25°C
• Dwell Time Guidance: 15- 20 Minutes*
• Applications / Coats: 1-2 applications

*Depending on temperatures, substrates and site conditions

• Designed to remove polymer hazes, films and residues from jointing mortars, resins and surface sealants
• Ready to use, gel-like formula
• Suitable for porcelain tiles and other porous natural and artificial stones
• Highly effective remover, works in less than 20 minutes

For all tools, see our Tools Section.

DIRECTIONS FOR USE
1) Always perform a test in an inconspicuous area on-site to check suitability of product, prior to use – read these instructions fully before application. If you experience difficulties using this product, please contact our technical support team on the
number above.
2) Always ensure you have adequate PPE and suitable protective clothing.
3) Prepare the area by cleaning off loose debris.
4) Pre-wet the surface area with clean water. Apply Resin-Off generously to the affected areas and leave to dwell for 15-20 minutes maximum. Agitate with a stiff brush or decking brush and wash off. Particular attention should be paid to highly textured surfaces. If using externally, after rinsing, you may pressure wash for faster results.
5) After allowing the surface to dry, inspect and if any stubborn patches remain you may repeat the process.

Official Data Sheet.