UltraTile ProLevel One: Deep Fill Floor Leveller

UltraTile ProLevel One is a single part, high strength, rapid drying and curing cementitious smoothing and levelling compound. The product’s formulation incorporates a blend of specially graded fillers, cements and polymers with a rapid curing profile to enable early fixing of tiles even at thicker depth applications.

Description

Frequently asked questions

UltraTile ProLevel One: Deep Fill Floor Leveller Technical Data

Unit Size: 20kg
Classification: CT-C35-F6
Depth: 3-60mm
Working time at 20°C: 20-30 Minutes
Walk on hardness time at 20°C: 3 hours (3mm application)
Tile after: 8 hours

Additional information:

Internal use
Formulated for depths up to 60mm in one application
Flexible properties for use with underfloor heating systems
Tile after 8 hours
20kg : 3.4L mixing ratio

Official Data Sheet.

How Do I use UltraTile ProLevel One: Deep Fill Floor Leveller?

For all tools, visit our Tools Section.

For all instructions on how to use UltraTile ProLevel Fibre: Reinforced Flexible Floor Leveller, please refer to the official data sheet, or read instructions provided on the bag.

MIXING & APPLICATION
Mixing ratios of powder and water should be controlled to ensure a free flowing material suitable for 3-60mm application. Do not use excess water as this will affect the product performance and finish. For trowel/hand application mix in a clean bucket using clean cold water, as warm water will greatly reduce the product’s working time and may result in shrinkage. Pour 3.4 litres of water into an oversized bucket (20+ litres), and then gradually add the powder whilst mixing continually with an electric drill with power whisk. When all powder is added mix for a further 2 minutes, keeping the whisk below the surface (to minimise air entrapment) until a lump free creamy material is attained. Once mixed, the product can be applied by pouring onto the floor and
spreading with a smooth edge steel trowel. Plan to begin at the furthest point working back towards the point of entry to avoid walking through wet product. Maintain a wet edge to ensure adjacent mixes blend in correctly. For large areas or deep sections it may be beneficial to batten off areas into sections. Keep free from floor traffic and other trades whilst curing.