UltraTile ProShield: Tanking Kit

UltraTile ProShield provides waterproof protection to backgrounds in wetrooms, domestic bathrooms, kitchens and showers and is suitable for both walls and floors prior to tiling. It is a polymer emulsion based product for use on internal installations only.

Category:

Description

UltraTile ProShield: Tanking Kit Technical Data

For all tools, see our Tools Section.

  • Unit Size: 8kg Buckets
  • Colours: White
  • Tile After: 24 hours
  • Coverage: 0.5kg per m² per coat
  • Drying Time*: 2 Hours First Coat and 24 Hours Second Coat
  • Application Temperatures: 5°C to 25°C

* Depending on temperatures, substrate, porosity of substrate and tile and the site conditions.

Additional Information: 

  • A flexible waterproof and crack bridging coating system
  • Easy to use components and no priming required
  • Provides complete protection from moisture
  • For use on all water sensitive backgrounds
  • Designed for wetrooms, showers, bathrooms and kitchens
  • Suitable for underfloor heating
  • Tape available to buy separately
  • Internal use
  • Waterproof

UltraTile ProShield provides waterproof protection to backgrounds in
commercial environments, wetrooms, domestic bathrooms, kitchens and
showers and is suitable for both walls and floors prior to tiling. It is a polymer
emulsion based product for use on internal installations only.
SURFACE PREPARATION
Ensure all areas are clean, dry and free from dust or any other contaminating barriers. Remove any flaking or peeling layers. Background surfaces must be free from movement.
New Brickwork, Blockwork and Concrete: Must be fully cured and dry, surface must be reasonably flat.
Gypsum Plaster/Anhydrite Type Floors: Must be completely dry. Ensure the surface is fully cured (with >0.5% moisture) prior to application of UltraTile ProShield.
Timber Walls/Floors, other Boarded Backgrounds: Background must be clean and free from any loose matter and the surface must be sound, dry and flat. Boards should be firmly fixed to supporting joists and free from any excessive or sudden movement. For floorboards, overlay with at least 15mm exterior grade plywood screw fixed at 300mm centres.
Note: Moisture sensitive backgrounds should be protected from moisture
ingress from behind.
APPLICATION
UltraTile ProShield should be applied using a brush or short pile roller to give a continuous thin layer of product at least 0.4mm thick. See application method opposite. Drying time will be extended depending on thickness applied, porosity of background and temperature if less than 20°C.

 

Official Data Sheet for UltraTile ProShield: Tanking Kit.